Research Facilities

Department has approved research centre and research guides with expertise in diverse field. We have state of art of Innovation Incubation and Research centre equipped with Advanced Technological platform.

Research facilities are available in various streams of Manufacturing, Thermal, Design and Reliability Engineering etc.

Infrastructure for doing research in the field of Mechatronic system, Industrial Hydraulic & Pneumatic System, Industrial Automation, CAD/CAM/CAE, Robotics, E-Vehicle, Advanced Drone Technology and Autonomous Vehicle ADAS are also available.

Publications

Research Centre

Department has approved research center offering Ph.D. degree in Mechanical Engineering. Research areas are mainly Manufacturing, Design, Thermal, Reliability Engineering etc.

Publications

Dr.M.S.Kadam

Dr.S B Ubale

1) Experimental Investigation and Modelling of Wire Electrical Discharge machining Process on W-Cu Metal Matrix Composite.Materials Today: Proceedings 5(2018) 84-90www.materialstoday.com/proceedings

2) Artificial Neural Network based Modelling of Wire Electrical Discharge on Tungsten-Copper Composite.Materials Today: Proceedings 5(2018) 5655-5663, www.materialstoday.com/proceedings

3) Experiment based parametric investigationand optimization of wire electrical dischargemachining process on W-Cu metal matrixcomposite, Advances in materials and Processing technologies ISSN: 2374-068X (Print) 2374-0698 (Online) Journal homepage: http://www.tandfonline.com/loi/tmpt20

4) Dr.S.B.Ubale, Experimental Investigation of process parameters in single point incremental forming for Aluminium 1050, International Conference on Industrial Engineering-2019.

5) Dr.S.B.Ubale, Experimental Investigation of process parameters on surface roughness in single point incremental forming for Aluminium 1050, International Journal of Research and Analytical Reviews.

Dr.R A Kathar

1) Experimental Study of Hydrocarbon Refrigerant Mixture R290/R600a as an Alternative to Refrigerant R134a used in Domestic Refrigerator, Intl. Journal of Advance Research in Science and Engineering,

ISSN:2319-8354, Vol No. 07, issue No. 01, January 2018, ISBN: 978-93-86238-39-9.

2) Design of ABS (Acrylonitrile Butadiene Styrene) Material Based Component and its Analysis for Mold Flow Conditions.Intl. Journal of Advance Research in Science and Engineering, ISSN:2319-8354, Vol No. 07, issue No. 01, January 2018, ISBN: 978-93-86238-39-9.

Dr.D R Dolas

1) Dr. Dhananjay R Dolas, Sarfaraz Ali Quadri, Shrikrishna B Pawar, “Vehicle To Vehicle Wireless Communication: A State Of Art,”Journal of Emerging Technologies and Innovative Research. March 2019, Volume 6, Issue 3, pp 218-221( 63975 UGC Approved,  ISSN: 2349-5162  Impact factor 5.87)

2) Shrikrishna B.Pawar, Sarfraz Ali Quadri, Dr. Dhananjay Dolas, “ Root Cause Analysis Of Extrusion Process Defects In Pvc Pipe Manufacturing ,” Journal of Emerging Technologies and Innovative Research,  March 2019, Volume 6, Issue 3, pp 246 251( 63975 UGC Approved,  ISSN: 2349-5162  Impact factor 5.87)

3) Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, “Experimental Investigation of Process Parameters on Surface Roughness and Flexural Strength in Fused Deposition Modeling For PC-ABS Material,” International Journal of 4) Research and Analytical Reviews.March 2019, Volume 6, Issue 1. Pp 14-19.

Lajari Chaudhari, Shrikrishna B. Pawar, Dr. Dhananjay. R. Dolas, “Wire cut EDM of experimental Investigations and empirical Modelling of surface roughness,” International Journal of Research and Analytical Reviews, IJRAR May 2019, Volume 6, Issue 2, pp361-365.

5) Lajari Chaudhari, Shrikrishna B. Pawar, Dr. Dhananjay. R. Dolas,” Analysis of Process Parameters of Wire EDM on Kerf Width,”   Journal of Emerging Technologies and Innovative Research (JETIR),  May 2019, Volume 6, Issue 5,pp 146-150.( 63975 UGC Approved,  ISSN: 2349-5162  Impact factor 5.87)

Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, Review of optimization of fused deposition modelling process parameters, Proceedings of 3rd National Conference on Industrial Engineering and Technology Management, NITIE Mumbai, Dec 2018.

6) Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, Experimental investigation of process parameters on surface roughness and flexural strength in fused deposition modeling for pc-abs material, International Journal of Research and Analytical Reviews, 6(1), pp 14-19, March 2019.

7)Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, Experimental investigation and empirical modelling of FDM process for tensile strength improvement, 1stInternational Conference on Innovative Product Design and Intelligent Manufacturing System, NIT Rourkela, May 2019.

Dr.A B Kulkarni

1) Centralization and Decentralization in Supply Chain Management, Shrishail Kandi, Antriksh Mutha, Abhay Kulkarni, International Journal of Industrial Engineering& Technology (IJIET), Research India Publications, Vol 7(3), December 2017

2) Efficiency Enhancement by 5S Implementation–A Case Study, Ila A Kulkarni, Abhay B Kulkarni, Vandana A Kulkarni, International Journal of Applied Engineering Research, Voli 13(17), pp 13296-13301, 2018

Dr.A L Chel

1)Vehicle Brake Failure and Road Accidents-An Investigation, Intl. Journal of Engg. Technology Science and Research, ISSN:2394-3386, Vol. 5, Issue 3, March 2018

2) Implementation and Interlinking of PFD, PFMEA and Control Plan in Small Scale Industry: A Case Study, Intl. Journal of Engg. Technology Science and Research, ISSN:2394-3386, Vol. 5, Issue 3, March 2018

Effect of Heat Conduction on Friction Pad Life in Disk Braking System, Intl. Journal of Applied Engg. Research, ISSN: 0973-4562, Vol. 13, Number5 (2018) pp 1-4,www.ripublication.com

3) Indian Youth should be trained Regarding Traditional Foods of the Country, Journal of Food Quality and Hazards Control, www.jfqhc.com

4) Determination of Select Heavy Metals in Air Samples from Aurangabad City, Springer Link, https://link.springer.com

5) Air Quality Status and Management in Tier II and III Indian Cities: A Case Study of Aurangabad City,. Maharashtra, Springer Link, https://link.springer.com

6) Agrowaste Materials as Composites for Biomedical Engineering, Springer Link, https://link.springer.com

Strategic Use of Control Plan as a Process Audit Tool in Automotive Industry: A Case Study, AIP Conference proceedings, Vol 2018 No. 1, https://aip.scitation.org/doi/abs/10.1063/1.5058243.

7) Analysis of Shielded metal arc welding parameter on Depth of Penetration on AISI 1020 Plates using RSM, Elsevier, Procedia Manufacturing 20 (2018) 239–246

Prof. Sumit D.Kaldate

Publications

  1. Comparative study of steel, aluminum and FRP plates on Ansys work-bench, Vista International Journal on Energy, Environment & Engineering, ISSN: 24565342, Volume 3, Issue No. (1-3) 2018, pp 18-22.
  2. Komal A Jahagirdar, S. D. Kaldate, Estimating RSM model to evaluate material removal rate and surface roughness in EDM of SCM 420 low alloy steel using electrolytic copper electrode, 59TH National Convention of Indian Institute Industrial Engineering and International Conference on Manufacturing and Industrial Engineering , 14th to 16th  September 2017 , MGM’s , JNEC, Aurangabad.
  3. Sumit D. Kaldate, Priya A. Gulbhile, Ms. Komal A Jahagirdar, Dr. Dhananjay R., Dr.Rajendra D. Kokate; Comparative Study of Steel , Alumnium and FRP plates on Ansys work-bench, 59TH National Convention of Indian Institute Industrial Engineering and International Conference on Manufacturing and Industrial Engineering , 14th to 16th  September 2017 , MGM’s , JNEC, Aurangabad.

Presentation

  1. Business Plan presentation on 17/08/2019 for the project “ Garlic & Ground nut peeling Machine” at Marthwada Innovation Challenge 2019 organized by Marathwada Accelerator for Growth & Incubation Council ( MAGIC) A’bad  in association with Chamber of Marthwada Industries & Agriculture (CMIA) Aurangabad.

S.B.PAWAR

PUBLICATIONS:

  1. Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, Review of optimization of fused deposition modelling process parameters, Proceedings of 3rdNational Conference on Industrial Engineering and Technology Management, NITIE Mumbai, Dec 2018.
  2. Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, Experimental investigation of process parameters on surface roughness and flexural strength in fused deposition modeling for pc-abs material, International Journal of Research and Analytical Reviews, 6(1), pp 14-19, March 2019.
  3. Shrikrishna B. Pawar, Dr. Dhananjay R. Dolas, Experimental investigation and empirical modelling of FDM process for tensile strength improvement, 1stInternational Conference on Innovative Product Design and Intelligent Manufacturing System, NIT Rourkela, May 2019.